| Item Number | S-515 |
|---|---|
| Name | Armstrong S-515 Tile Strong |
| Product Type | Adhesive |
| General Specifications | |
|---|---|
| Item Number | S-515 |
| Name | Armstrong S-515 Tile Strong |
| Product Type | Adhesive |
| General Description | Water-based/latex-resin |
| Advantages/Features | Can be used over "cutback" adhesive residue; Moisture and alkali resistant; Dries clear - allows chalk lines to show through; Excellent initial grab; Suitable for concrete slabs up to 95% RH. |
| Use with these products | RAVE; Crown Texture; Imperial Texture; MultiColor; Stonetex; Companion Square; ChromaSpin; Raffia; Feature Tile/Strips; SAFETY ZONE; Urethane No-Wax (Dry Back); Vinyl No-Wax (Dry Back) |
| Shelf Life | 1 year if not opened |
| CaCl MVER Limit | 7 lbs/1000 sq.ft. (5 lbs/1000 sq.ft. for Res. Dry Back Tile) |
| RH% Limit | 95 |
| High Moisture | true |
| Allowable pH Range | 5-11 (5-9 for Res. Dry Back Tile) |
| Calculated VOC | Zero g/L; calculated and reported, SCAQMD 1168 |
| Use & Installation | |
|---|---|
| Subfloors | All grade levels of concrete, ceramic, terrazzo, marble and polymeric poured floors; suspended wood; wherever Tile-On Installation System is approved |
| Application Method | Trowel |
| Spread Rate | 285-335 sq. ft./gal. (26-31 sq. m) |
| Open Time | Until dry-to-touch; approximately 30 minutes or more |
| Working Time | 24 hours - NOTE: Working times vary based on job conditions, subfloors, temperature and humidity. |