As you're shopping for wood flooring and exploring how to install it, you'll probably see the term "floating floor". So what is a floating floor? And is it right for your project? Let's explore this easy installation method — and which Armstrong Flooring products can be installed this way.
What is a floating hardwood floor installation?
A floating floor installation is a fast and easy DIY project. No glue-down, stapling or nailing is required because individual boards attach to each other instead of to a subfloor, so the wood floor essentially "floats" over the subfloor.
What Armstrong Flooring hardwood floors can be installed as floating floors?
Only Armstrong Flooring's engineered wood floors can use a floating installation.
Engineered boards that are able to be floated either feature a tongue-and-groove construction, or edges with a locking mechanism, such as Armstrong's Lock&Fold® technology.
How does Armstrong Flooring's Lock&Fold® installation work?
Many of Armstrong Flooring's engineered wood floors feature Lock&Fold technology, a floating floor system that is fast and easy to install. Boards simply lock together and fold into place, and no glue is needed to adhere the boards to each other.
This installation method delivers a tight fit and seamless appearance. We highly recommend this system for experienced DIYers.
Lock&Fold® Installation Method
How does a traditional tongue-and-groove floating floor work?
Check the engineered hardwood installation guide for the installation methods recommended for your flooring choice. Some engineered floors are designed with tongue-and-groove boards. You can turn these into a floating floor by applying a bead of glue in the groove, and then inserting the tongue of the next board. You still don't need an adhesive to glue the boards down to the subfloor — the glue is only required to connect the boards.
This is another type of floating floor that an experienced DIYer can handle, but it will take more time than the Lock&Fold system described above.
Tongue-and-Groove Installation Method
What are the benefits of using a floating hardwood floor installation?
There are several reasons a floating wood floor might be appealing to you:
- Subfloor flexibility – You can float wood over most subfloors, so long as it's level, flat, clean, dry and sound.
- DIY-friendly – It's a super DIY-friendly installation method, since little (if any) adhesive is necessary, and no nails or staples.
- Easy cleanup – After installation, it's easy to clean up. All that's needed is a mop or broom to dust off your Lock&Fold floors, and a little warm water for any glue residue, if glue was used.
- Easy removal – Removal is easy and can be done with little impact, should the use of the room change and a new floor is needed.
- Cost-saving – The cost to install a floating wood floor is less than other methods, because it's much faster!
- Lots of Design options – It's easy to find a look you'll love that can also be a floating floor. Engineered floors, which are the only Armstrong Flooring wood floors that can be floated, come in an enormous variety of colours and styles.
Are there any drawbacks to a floating floor?
Whether you use a floating floor with glue, or our Lock&Fold technology, it's possible that you will notice a bit more vertical movement on floors than if they were glued, stapled or nailed down. Most people do not even notice this though, nor find it bothersome.
If you do use glue to connect your tongue-and-groove boards, you need to wait 8 hours for the glue to dry before walking on the floor.
Do I still need an underlayment with a floating floor?
No matter how the floating hardwood is installed, an underlayment should be installed over the subfloor first, to give the flooring with some added protection against moisture and to improve sound transmission.
Where can I learn more about installing a floating floor?
Your engineered wood will come with an installation guide that shows you how to install your particular floating floor. We also offer plenty of tips, step-by-step instructions on our Hardwood Flooring Installation page.