Healthcare, education, and retail facilities have an extraordinary responsibility to protect the health and well-being of occupants with an environment that is clean, comfortable, dry and safe. Safety Zone Sheet Flooring is designed with this in mind, providing enhanced traction for an added measure of safety where it matters most.
Safety Zone Sheet features an embossed surface made with aluminum oxide particles that are encapsulated in a polyurethane finish for enhanced and easy, polish-free maintenance. It can be installed in wet barefoot areas up to 150 square feet, including lavatories, locker rooms, showers, spas, and wet physical therapy spaces. Contact your sales representative if your project has a wet environment larger than 150 square feet.
General Specifications | |
---|---|
Available Size | 6 ft. W up to 66 ft. L (1.83 m W up to 20 m L) |
Gauge (Thickness) | Product: 0.080 in. (2.0 mm) Wear Layer: 0.080 in. (2.0 mm) |
International Specifications | ASTM F1913 |
Warranty | 5-Year Commercial Resilient Limited Warranty |
Installation & Maintenance | |
---|---|
Maintenance Option | Low Maintenance Option: No Polish (Polish should not be used on Safety Zone sheet to retain its safety features.) |
Adhesives | High Moisture: Flip Spray Adhesive, 93% RH High Moisture: S-543, 90% RH, 5 lbs. MVER High Moisture: S-599, 85% RH, 5 lbs. MVER Epoxy: S-240, 90% RH, 8 lbs. MVER Flash Cove: S-580 Seams: Heat Weld Only Wet Applications: Perimeter Plus System |
Companion Products | Wall Base: Rubber, Vinyl Weld Rods: S: Solid (Aseptic and Non-Aseptic Spaces) Transitions: Metal, Wood Stair Treads, Risers, Rubber Tiles |
Armstrong Flooring is a responsible manufacturer, implementing and using processes that are both socially and environmental responsible, including deliberate raw materials and product testing and selection for the highest quality products.
Product contains no Ortho-Phthalates.
EPD (Environmental Product Declarations) indicate a product that has been third-party certified (Type III) with regard to life-cycle environmental impacts that conform to ISO 14025, 14040, 14044, and ISO 21930.
An HPD (Health Product Declaration) is a reporting tool that standardizes the disclosures of all ingredients associated with making a product.
Product has been tested and complies with the California Department of Public Health (CDPH) Standard Method V1.1 (2010) and/or the South Coast Air Quality Management District Rule #1168.
FloorScore® provides third-party certification that products are tested and comply with the California Department of Public Health (CDPH) Standard Method for Testing and Evaluating Volatile Organic Chemical (VOC) Emissions. As part of FloorScore certification, manufacturing processes, supply chain, and chemical sources are also verified and audited. FloorScore certified products meet strict Indoor Air Quality (IAQ) requirements.