Flexible vinyl skirting with a coved base (toe) and tapered top edge for use as a finish with smooth flooring. Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations. All sizes in 15 metre coils.
Flat, flexible vinyl skirting with tapered edges for use with carpet installations or as kick plates on doors. Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations. All sizes in 30 metre coils.
Flat, flexible vinyl with tapered edges for use on the wall abutting staircases to protect the finished surface from damage and marking. Available in 300mm width x 1.5mm thick x 30 metre coils.
A finishing strip to cover the exposed edge of vinyl on vertical surfaces, either vinyl wall sheeting or coved flooring. Available in 25mm width x 3mm thick x 15 metre coils.
A reducing strip that provides a flush finish at floor covering edges tapering down for a neat finish with floor. Available in 2mm, 3mm or 5mm thickness x 25mm width x 15 metre coils.
A reducing strip that provides a flush finish for the edge of the floor covering when installed on hardboard or cement sheeting underlay tapering down for a neat finish with floor. Available in 8mm thick x 35mm wide x 15 metre coils.
Provides a properly shaped coved section to act as a supporting base for coved sheet vinyl flooring. Available in 2 sizes, 32mm x 32mm and 20mm x 20mm. Available in 15 metre coils.
A diminishing strip used to equalise the thickness difference between coved floor vinyl and Wallflex wall vinyl. Forms the basis of the Armstrong hygienic vinyl system allowing a fully heat welded installation. Available tapered from 0.75mm to 0.1mm x 45mm wide in 25 metre coils.
Flexible insert incorporating a glow in the dark stripe of high-quality photo luminescent pigment for faster charging and longer glow. Suitable for aluminium and brass stair nosing, bump guards, and low light directional aid. Colours: Black & Glo, Yellow & Glo
Flexible insert for Fitting to aluminium or brass stair nosing to give a slip-retardant finish. Available in Hi-Vis Yellow for increased visibility and safety, also Standard Black and Flint. Available in 50mm and 26mm.
Flexible cover strip for installation over expansion and control joints. Use in conjunction with sheet and tile vinyl flooring. May be heat welded to sheet vinyl. Available in 2mm and 3mm thickness.